Wellness bath for thalasso and hydrotherapy.

 For underwater massage at automatic intervals on 5 body zones using 144 nozzles. Air and water are in the same channel system, thanks to this, vibration massage and mixing of aromatic and other additives in a finely dispersed form is possible.

 The tub body and cladding have a modern boat-like design. All functional units are mounted on a separate unit and integrated into the bath lining on the side of the fitting. Easily accessible through the inspection hole. Water consumption for one procedure is about 220 liters. Specially adapted to the shape of the body, has hand projections for procedures in a semi-recumbent position.

 Bath body made of heat-resistant seamless, seamless polyacrylic. Cladding in fiberglass-reinforced synthetic material. All elements related to water supply are made of synthetic materials.
 The choice of colors for the bath and cladding from the catalog. Thanks to the modern, rectilinear design, there are many possibilities for individual design, such as glass mosaics, two-tone plastic, bamboo or stainless steel.
 Equipment of the bathtub Hydroxeur Florida 300 (Hydroxeur Florida 300) :
 144 special nozzles
 10 nozzle chambers
 1 special drainage set controlled by a magnetic valve
 automatic water drain
 1 plastic distributor with 5
 plastic diaphragm valves
 1 water jet pump made of synthetic material for air mixing
 1 air mixing shut-off valve
 6 3/2 - way solenoid valves, 12 V
 1 special turbo pump made of synthetic materials, 1.6 kW, 230V, 50Hz, water circulation rate about 400 l / min.
 1 membrane compressor
 1 motor protection switch
 1 protection against idle (water level sensor)
 1 whole piping system made of synthetic materials, hoses withstand high pressure
 1 device for automatic bath filling with water, complete set: thermostat with protection against thermal burns, rated power: about
 60 l / min. 1 ¾ “valve for filling with water, 1 valve for hand shower, 1 hand shower with holder mounted on the edge of the bath. When filling the bathtub, water flows almost silently from a source on the edge of the bathtub.
 2 handrails
 1 soft headrest
 1 removable footrest

 Management Hydroxeur Florida 300 (Hydroxeur Florida 300) :
 Microprocessor control unit with the following functions:
 - automatic procedures on 5 body zones
 - timer with digital numeric indicator for 1-30
 min
 - air bubble procedures
 - deactivation of procedural zones
 - Automatic control of the drain valve and water drain from the bath channel system


 Technical data Hydroxeur Florida 300 (Hydroxeur Florida 300)
 Dimensions: 2300 x 900 x 860 mm
 Power supply: 230 V AC, 50 Hz, 2.3 kW,